在线免费视频

The incoming 23.65 m2 expanded to 25.05 m2 to the production office, and the space could meet the packaging operation. Die-cutting area: Change to Production Office, Due to the demand of diffusion capacity in the current die-cutting area, There is not enough space, The position needs to be readjusted, Auxiliary silo: The raw and auxiliary material silo is completely transformed into a fire-fighting passage, Set aside an area for transformation in SMT, as shown in Figure 8. Automatic first line: half assembly cable and south extension machine area, inner packaging area is transformed, assembly cable can be changed to automatic second line operation arrangement mode, i.e. Moving and adjusting cable spacing, inner packaging area adjusted to 6 6SMT part area is changed to auxiliary material bin (Figure, area can be used for production; 3.1 The die-cutting area is being expanded, and the number of die-cutting equipment to be applied for in the required area shall be determined, and the position adjustment shall be evaluated again. 3.2 Tuonan Film Sticking Machine suggests that the application should be transferred to ATV Headquarters by Manager Li of ATV Equipment Department. 3.3 The position of SMT's door will be readjusted as shown in the figure. There will be one automatic line and six manual lines, which will be one less manual line than the original arrangement. The length, width and height of fire engines are a decisive factor affecting the traffic capacity of fire lanes. Generally, the length of fire engines is greater than or close to 10m, the height is nearly 4m, and the width is nearly 2.5 m. Article 6.0. 2 of the "Construction Regulations" stipulates that the clear height and width of fire lanes passing through buildings shall not be less than 4m, which is determined according to the external dimensions of various fire vehicles used in China. Considering that the speed of fire engines is generally faster, a certain safety factor should be ensured on the width when passing through buildings to facilitate the fast speed of vehicles.******下一更比较晚，亲们等不及可以明早再看。听到苏小梨的话，一边的付宇锋顿时大笑起来。Sub. Operation ();心系国家的老党员罗秉文响应国家号召将儿子罗家明送往边疆参加支边建设。在支边期间罗家明认识了同为支边青年的科研人员沈湘玥，并帮助沈湘玥所在的科室研究出了新型化肥，大大提高了生产力。同时他在机械工程师宋思逸的影响下，心系祖国机械工业发展，组建了边疆的机械队伍，为边疆的机械化生产奠定了基础。在此过程中，罗家明与沈湘玥两人互相帮助、彼此欣赏，共同克服了种种困难，正当两人几经磨难眼看将要修成正果之际，却因为各自的理想而不能继续共事一处，风雨飘摇中，两人的命运将走向何处……自从定下了要帮秦霖娶紫茄做皇后的目标后，高凡再不能随心所欲。6. Ships engaged in mine clearance operations shall display three ring green lights or three spheres in addition to the lights or types specified for motor ships in Article 23 or anchor ships in Article 30. One of these lights or types shall be displayed near the top of the foremast, and the rest shall be displayed at each end of the foremast spine. These lights or patterns indicate